
Hose guide for high-altitude mines in Chile
Cold starts at altitude, big daily temperature swings and abrasive dust: what they do to hose, and how to plan stop kits.
Atacama conditions and what they do to hose
Chile's copper belt combines altitude, dust and big daily temperature swings. These are the conditions that decide which hose we quote.
| Condition | What it does to hose | How we quote for it |
|---|---|---|
| Altitude above 4,000 m | Freezing nights and cold starts stiffen covers | Hose rated for the low temperatures you give us, routed with enough bend radius for cold starts |
| Daily swings of 25 °C or more | Repeated expansion loosens poorly crimped ends | Calibrated crimping to the fitting maker's data, with every assembly pressure tested |
| Fine abrasive dust | Covers wear through where hoses touch | Spiral guards and sleeves at every contact point, specified on the quotation |
| Long haul ramps | Hoist and steering circuits run hot | Four-spiral hose in truck circuits, with fire sleeves near engines and exhausts |
Cold starts at altitude
Above 3,000 m, nights are cold even in summer. A hose that is flexible at noon can be stiff at the morning start, when pressure spikes are highest because the oil is thick. Choose hose by its low-temperature limit as well as its pressure rating, and keep that limit on record for every position.
Daily temperature swings
Large swings between day and night expand and contract hose and fittings every day. Correct crimping to the fitting maker's data, pressure testing and regular checks for weeping at the ferrule matter more here than at sea level.
Planning around the plant stop
Most Chilean pits change major hoses at planned stops. Build the hose list per machine from the stop plan, order early enough for production, sea freight to the Pacific and clearance, and keep the old assemblies as samples for the next kit.
Checklist for maintenance teams
- Record the low-temperature limit of every hose
- Watch for weeping at ferrules after cold nights
- Check guards at dusty contact points
- Build kit lists from the stop plan
- Keep old assemblies as samples
